The usage method of activated carbon

The main components of activated carbon are charcoal, various fruit shells, and high-quality coal, etc. It is processed and manufactured through a series of procedures such as crushing, sieving, rinsing, and drying by physical and chemical methods on the raw materials. Below, the manufacturer of honeycomb activated carbon in Zhejiang introduces the usage methods and applications of activated carbon.

1. Before using, we need to remove the dust first. Otherwise, the black dust may affect the cleanliness of the water. But we cannot directly rinse it with tap water because one of the advantages of activated carbon is its numerous pores. If it adsorbs chlorine in the tap water, it will cause damage to the water quality when used in the filter.

2. Activated carbon should be replaced regularly to avoid losing its effectiveness due to "adsorption saturation".

3. The time for replacing activated carbon should not be waited until it fails. It is recommended to replace it 1-2 times a month.

4. After using the activated carbon, we need to observe the change in water quality at the beginning of use. Pay attention to the observation results as the basis for determining when to replace the activated carbon due to its loss of effectiveness.